GET THIS LOOK IN 30 MINUTES, START TO FINISH!
- SAVES 45 MINUTES PROCESSING TIME PER SERVICE!
- FRAMESI STRIKE4 COLOR ME DIAMOND – TECHNIQUE HOW TO
Special Notes —
- Apply your lightener to the STRIKE4 sheet BEFORE placing the hair, this will help with control and saturation (allowing you to take thicker sections).
- During application, as you get closer to the root area feather your lightener upward to avoid a line of demarcation.
Placement —
- Starting in section 1 – begin your first STRIKE4 placement working from the front hairline back. Create your STRIKE4 placements taking ½ inch sliced partings, dropping ¼ inch in between each placement alternating in a brick laying pattern as shown in the diagram. (10 total STRIKE4 placements).
- Repeat step 1 for sections 2 & 3, following the face making diagonal placements (5 total STRIKE4 placements in section 2 & 3).
+
=
20
Seconds
To Process
Lighteners
Only Use
Product
Product
Developer
Strength
Strength
Mix Ratio
Flat Iron
Temperature
Temperature
Passes With The
Flat Iron
Flat Iron
Decolor B Clay Lightener
20 Volume or Lower
1:1.5
( 1 part Lightener :
1.5 parts developer )
( 1 part Lightener :
1.5 parts developer )
340 °F or 170 °C
5, No higher than 5
Decolor B Diamond
20 Volume or Lower
1:1.5
( 1 part Lightener :
1.5 parts developer )
( 1 part Lightener :
1.5 parts developer )
340 °F or 170 °C
5, No higher than 5
Decolor B No Dust
20 Volume or Lower
1:1.5
( 1 part Lightener :
1.5 parts developer )
( 1 part Lightener :
1.5 parts developer )
340 °F or 170 °C
5, No higher than 5
Directions for use must be followed to ensure the integrity of the hair, no exceptions or substitutions. Do not use on compromised hair. Perform a test strand prior to use.
Download PDFSchedule Your FREE Class Now!
Call 1-800-321-9648 Ext. 1354